A Muslin Turned Never-Ending Project

In my rather large pile of UFOs (unfinished objects) I found this rather Amish-looking linen dress that was in desperate need of a face-lift.IMG_5840It was intended to be practice for a loose shift dress (using Simplicity 1280) with long bell sleeves and a fabric belt, similar to this one. Of course, the slubby linen I chose to work with was completely wrong for that silhouette, but rather than abandoning the burlap sack I had made, I attempted to give it more structure. I added open darts to the front and back, slimmed down the sleeves and it still looked horrible.Flash forward about six months and I was ready to look at the sad, sad dress again. Figuring I had nothing left to lose on this one, I went ahead and chopped off one sleeve past the shoulder seam. It looked good! I chopped off the other sleeve and the dress already looked 10 times better. Other changes I made were to take out several of the darts I put in, add an armscye dart to take in excess fabric in the arm hole and shorten the hem by about 3 inches, curving it up toward the side seams and letting the back dip a little lower than the front. What a difference!IMG_6041I think it looks much more updated and wearable. In fact, I wore it today![surow][sucolumn size="1/2"]IMG_6047[/sucolumn][sucolumn size="1/2"]IMG_6048[/sucolumn][/surow]Although I really want to be done with this project, I'm sort of thinking it could benefit from some patch pockets and two darts in the back to take in some of the excess fabric there. I also don't love the neckline...it seems way too big, so that the bias binding on the little cutout juts forward.IMG_6049Or maybe I'll just call it done and move on! What do you think?

Me-Made May 2016 - Week 4

I'm a little sad to be ending this great challenge of wearing one handmade article of clothing each day. It's been so inspiring to see what others have made and to recap the (larger than I thought) collection of items that I've made. The experience of wearing my own clothes has helped me figure out ways to grow and become a better seamstress. It's made me realize some of my pitfalls, helped me figure out what styles and fabrics I like best, and where the gaps in my me-made wardrobe are.Also that I like to wear blue. Like, a lot. Maaaybe I should branch out more? But, then again, I know I'll wear it if it's blue...Here's a quick photo recap of the last week and a half's outfits:[BestWordpressGallery id="4" gal_title="MMMay Week 4"]I have a ton of dresses and a few solid skirt options, but my trousers and shirt options are very limited. I also don't have any me-made sweaters (except for that one in the back of my closet that's never seen the light of day because I ran out of yarn and had to get more and you can clearly see where the new yarn starts and it drives me crazy...)I guess my challenge for the next 2 months is not to buy any more fabric and to repair my makes that need some help. I've already fixed two dresses and a shirt, so it's a start!Oh, and one other awesome thing about wearing/making your own clothes is that it helps you limit RTW clothing purchases. Kind of hard to justify buying something if you could make it cheaper and better. Although, I did just buy a pair of jean shorts. They were only $10, ok?? And I've already worn them three times! And jorts are haaard. Although, I can't make my own shoes (yet) so I still can't help but buy those. I'm working on it.

L.A. Finch Fabrics Review

Someone I follow on Instagram recently posted a photo of some new fabrics that they got via a company called L.A. Finch Fabrics. I, of course, had to look into it to find out where these amazing fabrics had come from. Turns out that they have a gorgeous selection of apparel fabrics that would be difficult to find at most fabric stores. I did end up purchasing several yards of fabric to try out. Mostly rayon challis, ponte knit and one silk (my first silk purchase!).Here's a quick look at the new items:DSC00548Not only did they send the fabrics, they also included a huge stack of samples, 6 tiny coconut buttons, a good-sized length of black lace ribbon and several twill tape scraps which they used to bundle the fabric. There was, unfortunately, an issue with the  gorgeous floral rayon. I ordered two yards of it to make a dress and they sent me two separate yards of it. Obviously, that wouldn't work for making a dress.I emailed them and told them about the issue. The immediately gave me a refund for the floral fabric and asked if I'd like two yards of a different rayon since the floral had a dye issue. I looked through their site and nothing really stood out so I just asked for two more yards of the floral, weird dye or no.All in all I was disappointed that it happened in the first place but they handled the issue quickly and above and beyond my expectations. I will definitely continue shopping here because I'd like to support a smaller fabric company vs. JoAnn fabrics. Still, though, how does that even happen? Oh well.Here are the fabrics I bought draped on a form to show off the print/weight:DSC00551[Bohemian Vista Red Printed SilkDSC00552[Rayon Deer Printed WovenDSC00553[Helena Floral Rayon] DSC00554[Ruthie Printed Rayon ChallisDSC00556[Mustard Yellow Ponte De Roma SolidDSC00557[Ponte De Roma Black Velour Dot] And here is my plan for all these luscious fabrics!13266669_171841319880318_739493894_n

Me-Made May 2016 - Week 3

Week 3 of Me-Made May had me looking quite blue! I know there's a lot of blue, white and gray in my closet, but this week really showed me how much I reach for those colors. I'll blame it on the rainy May we've had so far, although it looks like the weather may be finally turning around!And I have a ton of blue-hued fabrics in the stash...oh well, I guess I should stick with what works! At least I know I'll wear it.Here's the past week's MMMay recap:[BestWordpressGallery id="1" gal_title="MMMay Week 3"] This past weekend I unearthed a box of UFOs...unfinished objects. An ominous phrase in sewing. I have several piece that need just a few touches before they're wearable again. Hopefully this week I can find some time to dedicate to these unloved pieces.A lovely package (the details of which will be shared later) came from L.A. Finch Fabrics. Their selection is so lovely, and from what I can tell, their fabrics are very high-quality. Can't wait to dig into my new fabrics!Unfortunately, I had to do some practical sewing this past weekend...new cushions for a super cool mid-century modern chair frame. It still had the original cushions on it and I've been saying for literally two years that I'm going to redo the cushions. Brad, in typical Brad fashion, found some foam (he still won't tell me where) and batting, so this weekend's project was to finally make new cushions. It took several hours of intense sewing (and a few choice words if I'm being honest) but we got it done! Now I can do some fun stuff. I'll share before and after photos later this week, as well as our process. 

Me-Made May 2016 - Week 2

The second week of Me-Made May 2016 is over and I've managed to not repeat any of my me-made items yet. Honestly, I had no idea there were so many wearable me-made pieces in my wardrobe! Although, I suppose that's why this sewing challenge exists. To rediscover past makes, get inspiration for new projects and motivation to fix issues with pieces that aren't working for one reason or another.Here's a recap of my second week wardrobe:[BestWordpressGallery id="2" gal_title="MMMay Week 2"] I still haven't managed to complete a project other than the black knit shirt I made at the very beginning. There's a pencil skirt in the works, though. Too many things to sew and not nearly enough time to sew them!

Me-Made May 2016 - Intro

This is the first year I will be participating in Me-Made May, a challenge started 6 years ago by Zoe over at So Zo, What Do You Know? Over the past few years I have seen other bloggers joining the challenge and finally, this year, I was on top of things enough to be aware that it was coming up and plan accordingly. Yay for thinking ahead!I've challenged myself to wear one "me-made" item a day throughout the month of May. To keep myself accountable, I will take daily photos (if you follow me on Instagram, be warned - lots of selfies are coming) and I will post my progress weekly on this blog.It's only day 9 and I've already been so inspired by what everyone else is showing off! My sewing mind is on overdrive and I can't wait till I get the chance to sit down at my machine again.To avoid becoming overwhelmed by all the projects I have in mind, I've decided to make a plan. I want to try to create a new piece each week and here's my plan:12960167_634963966652421_814502092_nI made a prototype of the woven tee although I've been lurking HARD on Grainline's Scout Tee but just can't justify the cost of a pattern for what should be so simple to draft. My initial shot at the self-drafted tee has some issues that need to be worked out (sleeve cap too high, neckline too big, overall front width too big...) but it might be salvageable. You can see it in the first photo below:[BestWordpressGallery id="3" gal_title="MMMay16 Week 1"]After my first full week of wearing one me-made item a day I can pick up on a few trends:

  • I am drawn to floral printed fabrics. This is a little surprising to me as most of my RTW wardrobe is very basic and limited to stripes or polka dots in terms of pattern. I guess sewing is where I make more feminine pattern choices!
  • The majority of the pieces I've worn so far are self-drafted. Maybe this is because I'm not comfortable sewing patterns yet? Or maybe because these tend to fit better? Not sure...
  • Speaking of fitting better, almost every piece I've worn has some sort of fitting issue I notice. The main issues are low armholes and forward-thrusting, sloping shoulders (I think). This was especially apparent on the yellow blouse.
Things to consider for the coming week:
  • Make any fitting adjustments to the garment before I wear it. I could have easily adjusted the sleeve width on the kimono top, but instead I let it drive me crazy all day.
  • Don't worry about not completing some of the other parts of my pledge (finishing a garment every week, posting a photo every day) because sometimes it's just not feasible.
  • Always use a nice camera for the photos! The iPhone ones are so crappy looking but my fancy camera wasn't cooperating for a couple of the days.
  • Plan an extra 10 minutes to take a photo before heading to work. My mornings have been a little frantic and that doesn't translate to a good vibe for the day.
Are you participating in Me-Made May? I'd love to connect!

DIY Flowing Blouse with Open Straps

Today I bring you a tutorial on how to take an existing shirt, create a pattern from it, and stitch it up. The most time consuming piece of this shirt was creating the bias tape. Basically, it's quite simple.DSC00127First, you take a woven shirt that you like the fit of. Pin the back and front together on the center folds, pinning the armholes together as well. Place tracing paper over the shirt and trace around the outline, slightly shaping the side seam.DSC00128DSC00129DSC00130Label the pattern piece with all relevant info and mark your seam allowances (I used 5/8"). Shorten the length of the straps so that you can use bias tape later to create them.DSC00108Trace the front piece and include any darts.DSC00109Mark a line from the dart point to the bottom of the shirt and from the dart point over to the center front. Cut these lines, including the dart.DSC00115Measure the dart in the shirt to see how far you need to spread the dart. If the dart is 1/2" on either side of the fold you will need to spread it 1". Spread the dart so that you have the right measurement.DSC00122Slide paper under the cut pieces, tape everything together and re-draw the bottom hem lines and sleeve line. DSC00124Fold the dart to mark the seam lines (ignore my mistake lines).DSC00125Ta-da! You have a front shirt piece. Cut all of the excess paper off.DSC00132You should only have two pieces for this pattern, a front and back. They will both be cut on the fold.DSC00171In order to cut both pieces on the fold, bring the selvedge edges to the center of the fabric and lay out your pattern pieces.DSC00187Make some bias tape. I made a ton using this tutorial: http://whip-stitch.com/continuous-bias-tape-tutorial/DSC00188Sew the front and back pieces together at the side seams. I used french seams.DSC00191Pin and sew bias tape across the tops of the straps.DSC00192Stitch bias tape around the whole neckline and back, using your original shirt as a guide for the length,DSC00193Stitch bias tape around each armhole, again using your original shirt as a guide for length. Hem, using a narrow hem or bias tape.DSC00194Your flowy, open-strapped tank is done!DSC00196

2015 Fall Sewing Plan

After seeing Lladybird's sewing room tour and her brilliant corkboard with line drawings of patterns matched up with fabric I decided to do something similar to plan my fall/winter wardrobe. Also, I have a cart full of fabric from fabric.com and I needed to actually figure out what I would use it all for and how much I needed to buy.As I was copying/pasting the fabric swatches into a document I began to notice some color trends:[responsive]Fall_2015_SewingPlan-1[/responsive]So we're looking at plum, blush pink, coral, camel, dark teal, turquoise (of course), soft royal blue and navy blue. Looking pretty good for fall! Darker, desaturated colors but not completely boring. I think planning like this is really going to help me break out of my usual color choices.The next step was taking all my fabric choices and figuring out which patterns would work for them. I tried (and succeeded!) to only use patterns I already own. A little photoshopping, laying them out in Illustrator and ta-da! The 2015 Fall/Winter collection has emerged:[responsive]Fall_2015_SewingPlan-3[/responsive]1. Fabric  |  Pattern2. Fabric  |  Inspiration  |  Pattern3. Fabric  |  Pattern4. Fabric  |  Pattern5. Fabric  |  Pattern  (camel wool already purchased)[responsive]Fall_2015_SewingPlan-2[/responsive]1. Fabric  |  Fabric  |  Fabric  |  Pattern2. Fabric  |  Pattern3. Fabric  |  Pattern4. Pattern  (fabric already purchased)5. Fabric  |  Fabric  |  Pattern The breakdown:1 Wool Jacket1 Ponte Blazer1 Button Down Shirt5 (!) Dresses1 Zip Up Hoodie1 Pair Stretchy Pants3 Jersey Tees (2 long sleeve, 1 mid) It does seem like a lot of dresses, but I love how easily they transition from summer > fall > winter (with tights). Some of them also feature long sleeves and should work well for cooler weather.I don't have any pants on the list other than some comfy sweat pants but I do have denim to make another pair of Gingers if I feel so inclined. My jeans stock is already pretty full, though, so I don't really need another pair. I also have some fabric set aside for a quick summer tank top with some pink floral rayon challis, an open front sweater with some gray slub knit and a sleeveless button down tank top with some yellow patterned cotton. So...we'll call those projects "end-of-summer" plans.Also, Brad wants a shirt. I hilariously miscut the pattern and fabric pieces for Brad's shirt assuming he would be the smallest size. I had him try on the pieces once the front and back were joined and I might as well have made it for a child. No idea why I didn't measure him first to check. A serious brain fart moment.This seems like a daunting list, but I'm excited to tackle it! On to the sewing machine...

Nettie Summer Dress

Buying fabric online is always a bit of a challenge...There's just no good way to tell how heavy or light a fabric will be without ordering a swatch (and who has time for that?). So when I ordered a floral knit from fabric.com I wasn't sure what to expect. I was hoping for something thicker to make a nice circle skirt out of but I ended up with a lightweight jersey that would be great for a t-shirt. Except I had 2 yards and no need for a floral tee.It sat in my stash for a few months until I finally found the perfect pattern to suit its lightweight, stretchy nature. Enter the Nettie Bodysuit pattern from Closet Case Files. This pattern was made for 4-way stretch fabrics and has a body-hugging fit with negative ease. In order to make it a dress I just cut my bodice pattern pieces to end around my waistline and used a previously drafted 1/2 circle skirt pattern. Even though the two pieces weren't exactly the same size at the bottom I just pinned them together in few places and held the tension evenly, which worked out just fine.responsive]IMG_4348[/responsiveHere is the step-by-step process:1. Iron fabric and cut out pieces. I ended up folding the selvedge edges to the center of my fabric so I could use the fabric economically and cut the bodice pieces on the folds.2. RST, serge shoulders, stabilizing with clear swimsuit elastic.3. Fold binding in half lengthwise (WST), press, then sew up short edge of neck binding (RST). Attach it to the neckline using pins spaced out evenly. Raw edges should be together and the binding should be touching the right side of the bodice fabric.4. Serge binding to neckline, flip, press and top stitch about 1/8" from the seam over your serged edges.5. Attach sleeves to the bodice flat. Just try not to stretch them too much and pin evenly.6. Attach skirt front and skirt back to bodice bottom. Pin evenly, and as you're serging, use clear swim elastic to stabilize the seam and keep it from sagging.7. Hem sleeves and skirt (I folded up the fabric once and topstitched using a double needle.) I discovered at this point that hemming a circular skirt is way easier with knit fabrics than wovens.8. Serge the side seams from the sleeve hems to the skirt hems.9. Try on and adjust side seams as necessary. I had to take it in at the waist a little bit, but this might not have been needed if the fabric was heavier.[responsive]IMG_4347[/responsive]That's it! It sewed up in about 3 hours and may be one of the most comfortable dresses I've ever made. I chose to do the medium back, scoop front and 3/4 sleeves with a 20" long skirt. Next time I may choose to do a higher neckline in the front or back because the sleeves do tend to slip off my shoulders. Another way I could work on that problem would be to extend the shoulders a little bit toward my neck. One other tiny thing: I think the weight of the skirt is pulling down the waistline a little bit so I would shorten the waist by 1/2" to 1". Technically you should also let the skirt pieces hang on a mannequin to let the bias stretch before trimming the hem to an even length again buuuut we already discussed how I'm impatient and don't have time for that. I'd rather have a slightly uneven hem and be able to wear the garment asap.All in all I'm super satisfied with my new floral summer dress!

First Pair of Ginger Jeans

I bought my first indie sewing patterns from Sewaholic and Closet Case Files a few weeks ago. The one I am probably most excited about is the Ginger Jeans pattern. I've never seen such a nice-looking skinny jeans pattern made for curvier ladies and it even comes with two versions (high-waisted skinnies and low-waisted stovepipes).After researching other people's makes and reading through the sew-a-long multiple times I felt ready to move forward with making my first pair of jeans out of some weird floral stretchy denim ($2 a yard!).I have to say, I am most pleased with how neat and clean my front fly turned out. My topstitching actually turned out pretty nice, too, although I just used regular thread for these practice jeans. I didn't use any rivets or even a jeans button, opting instead to use two regular buttons.Unfortunately the fit really wasn't working for me, so I had to make quite a few adjustments. Based on my measurements I cut a size 12, grading to 14 at the hip and back to 12 for the waistband. I ended up taking a wedge out of the back yoke, stitching four 1/2" darts in the waistband, taking in the sides at the hips by almost 1 1/2" and the fit still wasn't right. So I took in the inseam at the crotch by about 1 1/2" and flattened out the front crotch curve. I probably should have left the crotch alone and instead taken in the waist even more because they went from high-waisted to about 1/2" below my belly button. I also tapered the calf area by about 1 - 1/2" from the knee on either side.Luckily, I had basted the seams, so I was able to adjust the fitting quite a bit. I'm not sure if it was my fabric choice (the denim is very lightweight and pretty stretchy) but the size I cut just overall seemed way too big. I have some heavier stretch denim (that I used for Brad's apron) and hopefully it will work better.The adjustments I plan on making to the next pair are: cut a straight size 12, make a swayback adjustment to the yoke and waistband, place the zipper a little closer to the fly, shorten pocket length and I may omit the pocket stays. I like the idea of pocket stays but I don't like that I can actually see the bottom of the stays through the pants fabric. There are definitely some issues with the jeans but they were great practice for several new techniques and I feel like I have a better understanding of how to fit pants.Disclaimer: If you keep scrolling you will see my half-baked attempts to photograph myself, awkward facial expressions, gratuitous booty shots and at least one awkward crotch shot. Scroll at your own peril.[responsive]ginger_jeans-1[/responsive][responsive]ginger_jeans-2[/responsive][responsive]ginger_jeans-3[/responsive]

Pattern Review - Simplicity 1755

[responsive]DSC_0256[/responsive]I've been on a sewing binge lately, hitting up the fabric stores...ordering a serger...lying awake at night dreaming up my next project...it's getting out of hand. The first sewing project I decided to make during my latest binge was Simplicity 1755 in view A, a Leanne Marshall pattern. I really like the unique neckline, preppy collar, angled raglan-style seam lines and the delicately pleated skirt. All those features make this pattern a little less versatile, but I can see making some frank-en-patterns with the pleated skirt attached to a different bodice, or the bodice turned into a peplum with a little circle skirt.I cut a straight size 12 after double checking to make sure the waist wasn't going to have too much ease. (My measurements are 36" bust, 31.5" waist, 42" hips.) It fits perfectly with no alterations! A big four miracle. The fabric is an inexpensive chambray from Hancock Fabrics. I found it lying in the apparel flat fold pile and thought the weight would be perfect for the structure this dress has. And now you will be subjected to my solo photography while the sun is setting struggles. I'm sure the neighbors were highly amused by my antics (walking in high heels in the mud, trying to avoid doggy land mines, changing the angle of the tripod, etc.)[suslider source="media: 782,783,786,785,784" link="image" width="600" height="800" title="no" pages="no" mousewheel="no" autoplay="0" speed="0"]The instructions were clear and easy to follow. If I make this pattern again I will wait to slip stitch the lining to the skirt until after I sew in the zipper so I can machine-stitch the lining to the zipper tape. Hand sewing isn't my favorite but I guess it's good to practice.The pleats were a little difficult to interpret on the side seams. It took me pinning the panels together at the sides to understand how they were supposed to be folded over the seam to hide it.All in all it was a quick dress to make (maybe 12 hours total) and I LOVE the look. It's kind of got a sporty 50's vibe. I also got to try out a new technique for hook and eye closures by knotting thread around itself to form a loop, sort of like those friendship bracelets everyone used to make.[suslider source="media: 780,781,788,787" link="image" width="600" height="800" title="no" pages="no" mousewheel="no" autoplay="0" speed="0"]

Shop Apron for a Handy Man

Brad's been working on the house non-stop since we moved in almost three years ago. I do what I can to help, but usually that means providing snacks and drinks and staying out of the way. Normally I'm very selfish when it comes to sewing. If I can't show it off, what's the point of spending hours hunched over the sewing machine?This shop apron for my handy hubby is the exception to my selfish sewing rule. It all started when I spotted 3.5 yards of this deep indigo denim material on the flat fold table at Hancock Fabrics (have you seen this section? I've found some ah-mazing stuff there and it's all $4.95 per yard.) The material has some stretch to it, and while that's going to be perfect for the Ginger jeans I plan on making soon, it's not exactly ideal for this apron since there's some waviness happening in the horizontal seams.(Side note: when buying new denim pre-wash it separately from other fabrics. Unless you like the slightly grayish blue tint it leaves behind on all the areas of your other fabrics that are supposed to be white. Apparently I don't.)The construction of the apron is fairly simple. I took a few quick measurements and drew them directly on the wrong side of the fabric, trying to go with the grain as much as possible by lining up the fold along the tiny twill lines.My initial measurements are on the left in the gray box and my measurements with seam allowance are on the right in the white box. I used a 1" seam allowance on each edge so the edge could be folded down 1/2", then turned under another 1/2" and top stitched. I measured just under the collarbone across the chest (8"), around the front of the waist to the side seams of his shirt (18"), from collarbone to waist (12") and from collarbone to below his knees (40").[responsive]apron_measurements[/responsive]The dashed line on the apron shows the pocket placement, the dashed line on the pocket shows a line of stitching to create a pencil pocket and the seam allowance is a little different on the pocket since the left, right and bottom edges were just turned under 1/2" then stitched down.[responsive]IMG_3961-small[/responsive]Please excuse the mess in the background...someday I'll get some fancy well-lit photos of this thing, but for now I'm just happy he let me photograph him in it.We tore apart an old point-and-shoot camera bag for the straps and hardware. Always save the hardware and zippers, even if you'll never use the bag and want to get rid of it! That stuff ain't cheap.The neck strap and D rings were sewn directly into the edge while I was top stitching. I had Brad put on the apron and we threaded the strap through the D rings, adjusted the length to his liking and snipped the strap. I stitched down the end of the strap to keep it from fraying and made a denim loop which I hand sewed about 3" above the D rings to keep the strap in place.The waist strap has a slider already on it, so we kept that and the buckle at the end and I just sewed a large metal ring into the other side to give the buckle something to clasp onto. I had originally planned on making all the straps out of denim (even going as far as making them and top stitching them) but as Brad was digging for D rings he found this old camera bag and we just went with it. Now I have denim straps left over...maybe a half apron for me? :)We also ended up chopping a few inches off the hem to make it easier to walk around. 40" makes a pretty long apron, but 35" seems to work well.[responsive]IMG_3962-small[/responsive][responsive]IMG_3963-small[/responsive][responsive]IMG_3964-small[/responsive]I discovered a foot that really helped me get even top stitching: the blind stitch foot. It looks kind of like this:I used the blind hem guide in the middle with a straight stitch set at 3mm to slowly sew along the edge of the fabric, then did a second line using the right edge of the foot as a guide. It seemed to work pretty well and it's good to figure these things out before moving on to actual jeans.Anyway, there it is! I foresee this shop apron getting lots of use and hopefully Brad with naturally age it by spilling bleach and get dust on IT instead of on his clothes. Fingers crossed.Are there any presser feet that you've found to be really helpful, even if you don't use it for its intended purpose?

Review of Simplicity Sewing Pattern 1801 Misses' Dresses Cynthia Rowley Collection

It's been a while since I've posted about a sewing project. Partly due to the fact that I haven't been sewing much and partly due to my newest side project...Parker Natural Care! After about 6 months of making my own products (everything from lip balm to deodorant) I decided to start a natural skin care company to share my products with the world. So far 'the world' is just friends and family, but it's growing!Anyway, my latest venture in sewing was spurred by a fabric. A beautiful, lightweight rayon challis from fabric.com. Honestly, the fabric probably wasn't the best for this project, but it still worked out. I ended up having to fully line the dress in order to make it somewhat opaque and I had to be really careful when ripping out gathering stitches because the challis is pretty delicate and shows snags easily. Also the wrong side and right side are virtually indistinguishable except in certain light.I cut a straight size 14 of this pattern after checking the actual waist measurement and making sure there wouldn't be too much ease. I figured with the way the top and skirt is gathered the fit should be pretty forgiving. That was pretty much right on, although if I make this pattern again I will probably adjust the neckline to make it higher and take a little out of the shoulder seam and a little out of each waist seam.[responsive]IMG_3540-edited[/responsive]That said, this dress is very wearable and it's super light and flowy. Perfect for summer! Actually, the looser waist is kind of nice, too, so I don't feel like I have to suck it in all the time :)[responsive]IMG_3483-edited[/responsive]There was nothing too crazy about this pattern except for the side zipper and in-seam pockets. I've done in-seam pockets before but it was a little different when I had to sew a zipper into the side of the pocket. The instructions were clear, though and I didn't have an issue with the pockets. Of course, I put the zipper in on the right side instead of the left. Oops. Just a learning experience for the next time, I guess![responsive]IMG_3551[/responsive] Bonus:I had my phone set up to take a few quick pictures and set the 10 second timer. Didn't realize that it also took 10 photos in a burst, but I thought they look pretty cool as gifs.[responsive]dress_gif_2[/responsive][responsive]dress_gif[/responsive]

Green Jersey Circle Skirt

In my sewing frenzy last night, I made a circle skirt using the tutorial on MADE. I thought I had been charging my camera battery all night, but it must not have been connected correctly because I got a total of two pictures out of the battery. Neither of which were of the skirt. So I had my fiance take a pic with his cell phone (why does picture get shortened to "pic" in my mind when it was taken with a phone?) But first Q and I waited for the fiance while he did laundry.

I am so in love with this dress! It took no time at all and it is suuuuper comfy. Will definitely be furiously sewing many more.

A Skirt and Some Buttons

After working the booth at Italianfest all weekend, I was eager to get some "me" time and do some sewing. I picked up a remnant this morning at JoAnn Fabrics. It's a beautiful white eyelet with a paisley pattern.There was a yard left, and I snatched it up to make a skirt. The one yard was a little short (and see through) so I cut it in half horizontally and used some muslin I had lying around to line it.I forgot the camera for the first part of the process, but basically I cut each piece of fabric horizontally to make four 20" x about 60" (two of the muslin and two of the eyelet.) I sewed the short ends of the two muslin pieces and did the same with the eyelet pieces to make two wide tubes. Then I sewed the tops of the tubes together with wrong sides facing out.Next step is hemming. I actually took pictures of this! Just fold and iron the hem down twice.ImageImageAfter you've hemmed, sew a tube along the top of the skirt (making sure your elastic will fit) and leave an opening to push the elastic through.ImageImageImageImageImageAttach a safety pin to both ends: pin one to the end of the tube so it doesn't slip through. Use to other one on the other end of the elastic to push it through the tube at the top of the skirt.ImageImageSew the ends of the elastic together and close up the tube. You're done!ImageAnd, as an added bonus I made some fabric covered buttons!ImageImageImageImageEnjoy!